BIOT-MEM-72E01BC0
PCF 8563 RTC Board
৳ 450
In stock
WiFi Module DT 06. Transmit power: 802.11b: +20 dBm 802.11g: +17 dBm 802.11n: +14 dBm; Receiving sensitivity: 802.11b: -91 dBm (11Mbps) 802.11g: -75 dBm (54Mbps) 802.11n: -72 dBm (MCS7)
WiFi Module DT 06 can be used in compatible electronic projects. Check the specifications below when selecting the part for your circuit.
| Type | Item | Parameters |
|---|---|---|
| Wi-Fi | Frequency | 2.4G ~ 2.5G (2400M ~ 2483.5M) |
| Transmit power | 802.11b: +20 dBm 802.11g: +17 dBm 802.11n: +14 dBm | |
| Receiving sensitivity | 802.11b: -91 dBm (11Mbps) 802.11g: -75 dBm (54Mbps) 802.11n: -72 dBm (MCS7) | |
| Antenna | PCB onboard antenna | |
| Hardware | CPU | Tensilica L106 32-bit MCU |
| Peripheral | UART / EN / STATE | |
| Working voltage | 3.3V | |
| Working current | Average current: 80 mA | |
| Working temperature | -40°C ~ 125°C | |
| Environment Temperature | -40°C ~ 125°C | |
| Size | 34 mm × 17 mm × 4 mm |
| Num | Pin Name | Type | Description / Function |
|---|---|---|---|
| 1 | STATE | I/O | Indicates the Wi-Fi connection status (Connected / Disconnected). Typically used for an LED or as an input to an MCU. |
| 2 | RXD | I/O | Receives serial data. Used for programming, AT commands, or sending data from an MCU. |
| 3 | TXD | I/O | Sends serial data. Used for debugging or communication with an MCU. |
| 4 | GND | Power | Ground pin. Must be connected to the power supply and MCU GND. |
| 5 | VCC | Power | 3.3V DC power input. 5V should not be applied directly. |
| 6 | EN (CH_PD) | Control | Enables or disables the module. HIGH (3.3V) turns it on, LOW turns it off. |
| Country of origin | China |
|---|
No documents yet.
WiFi Module DT 06
৳ 450