ESP Prog Development Board

ESP Prog Development Board

ESP Prog Development Board can be used in compatible electronic projects. Check the specifications below when selecting the part for your circuit.

Technical Specifications

Features and Details

• Micro USB: Connects ESP-Prog to PC for power and data
• Boot Button: Puts connected board in Firmware Download Mode
• IO0 Switch: Controls GPIO0 pin state
• PROG PWR SEL: Selects power source for Program interface
• JTAG PWR SEL: Selects power source for JTAG interface
• Program Header: 1.27 mm and 2.54 mm pin pitch connectors
• JTAG Header: 1.27 mm and 2.54 mm pin pitch connectors
• LED Indicator: Shows system status via red (power), green (download), and blue (receive)
• Reset Button: Resets the board
• USB Bridge: High-speed UART communication chip (FT2232HL)
• Dual-port detection (Program and JTAG interfaces)
• Switchable power output: 3.3V or 5V (signals always at 3.3V level)
• FT2232HL USB-to-UART bridge for reliable data transfer
• 1 X ESP Prog Development Board