BIOT-BAS-8C53FEBA
Ceramic Capacitor 102 1000pF
৳ 2
In stock
Arduino Advance Learning Kit
Arduino Advance Learning Kit can be used in compatible electronic projects. Check the specifications below when selecting the part for your circuit.
| S/N | Quantity | Item Description |
|---|---|---|
| 1 | 1x | UNO R3 SMD Board + USB Cable |
| 2 | 1x | 830-Point Breadboard |
| 3 | 30x | Breadboard Jumpers |
| 4 | 5x | LEDs (Red, Green, Yellow) |
| 5 | 10x | Resistors (1KΩ, 10KΩ, 220Ω) |
| 6 | 1x | Male-to-Female Jumper Wire (10 Pin) |
| 7 | 1x | 10K Potentiometer |
| 8 | 1x | Active Buzzer |
| 9 | 1x | Passive Buzzer |
| 10 | 1x | 74HC595N Shift Register |
| 11 | 1x | Infrared Receiver |
| 12 | 1x | IR Receiver Shied |
| 13 | 1x | LM35DZ Temperature Sensor |
| 14 | 2x | Tilt Switches |
| 15 | 3x | 5mm LDR |
| 16 | 5x | Push Buttons with Cap |
| 17 | 1x | IR Remote Control |
| 18 | 1x | 1-Digit 7 Segment Display (0.56") |
| 19 | 1x | 4-Digit 7 Segment Display (0.36") |
| 20 | 1x | 8×8 Dot Matrix Display |
| 21 | 1x | UNL2003 Stepper Motor Driver Board |
| 22 | 1x | 5V Stepper Motor |
| 23 | 1x | SG90 Servo Motor |
| 24 | 1x | LCD1602 Display + 40-Pin Male Header (unsoldered) |
| 25 | 1x | Joystick Module |
| 26 | 1x | DHT11 Temperature & Humidity Sensor |
| 27 | 1x | Water Level Sensor |
| 28 | 1x | RFID Module |
| 29 | 1x | RFID Key Ring |
| 30 | 1x | RFID Card |
| 31 | 1x | Sound Detection Module |
| 32 | 1x | Single-Channel Relay Module |
| 33 | 1x | RTC (Real-Time Clock) Module |
| 34 | 1x | 16-Key Matrix Keypad |
| 35 | 1x | RGB LED Module |
| 36 | 1x | 9V Battery Connector |
| Country of origin | China |
|---|
No documents yet.
Arduino Advance Learning Kit
৳ 3,160